<em id="4igh2"></em>

    <button id="4igh2"><object id="4igh2"></object></button>
    <button id="4igh2"><object id="4igh2"></object></button>

  1. <em id="4igh2"></em><dd id="4igh2"><track id="4igh2"></track></dd>
    <rp id="4igh2"></rp><em id="4igh2"></em>

    <rp id="4igh2"><acronym id="4igh2"></acronym></rp>

    <button id="4igh2"><acronym id="4igh2"></acronym></button>
    <em id="4igh2"></em>

      Welcome to SPLENDID RUBBER PRODUCTS(SHEN ZHEN)CO.,LTD!
      Chinese | English
      Hot Line:
      0755-28395982

      Recommended Products

      Home > News
        [Company News]Performance comparison of O type ring[ 09/26, 2016 ]
        SIL silicone rubber O ring: Excellent heat resistance, cold resistance, ozone resistance, resistance to atmospheric aging. Have very good insulation performance. But the tensile strength is lower than that of general rubber and is not oil r
        [Company News]The wide use of O type circle[ 09/26, 2016 ]
        O type rubber ring is suitable for hydraulic oil, hydraulic oil, hydraulic oil, two ester series oil, gasoline, water, silicone grease, silicone oil and other media. Is the most widely used, the lowest cost of rubber seals. Not applicable t
        [Company News]Sealing ring mold maintenance[ 09/26, 2016 ]
        The maintenance work of the mold of the sealing ring, the good condition of the play, to ensure the quality of stamping parts, to avoid the occurrence of accidents, to extend its service life, to ensure the normal production. Has a very imp
        [Company News]The reason and prevention measures ...[ 09/26, 2016 ]
        Type O sealing ring design, improper use will accelerate the damage to the O type sealing ring, loss of sealing performance. The experiment shows that the design of each part of the sealing device is reasonable, the pressure is increased, a
        [Company News]Attention to the disassembly and assembly of...[ 09/26, 2016 ]
        Note on the disassembly and assembly of rubber O ring mould 1 mold handling, pay attention to the upper and lower die (or die) in mold shaped hands (a walking mode, the other hand die), stably handling, handle with care. 2 mold disassembly
        [Company News]History of rubber O - type rubber[ 09/26, 2016 ]
        In 1736, details of the French scientist Kang Damin back to the rubber tree from Peru, published the "South American mainland travel notes on", the book describes the use of methods and rubber collection of rubber tree origin, lat
        [Industry News]A few things to form a rubber O type of aging[ 09/26, 2016 ]
        (A) oxygen: oxygen free radical chain reaction in the rubber O ring with rubber molecular chains, cracking or excessive crosslinking, resulting in changes of rubber O ring function. Oxidation is one of the important reasons for the aging of
        [Industry News]Some views on the type of rubber sealing ring[ 09/26, 2016 ]
        We all know that the rapid expansion of China's car industry, has created a high performance rubber sealing ring seal no amount of shopping malls, cars, construction machinery, imported equipment, such as repair shopping malls also have the
        [Industry News]Mechanical seal auxiliary O type ring commonly used material[ 09/26, 2016 ]
        Mechanical seal according to the environment is not the same, the sealing surface of the material is not the same, the O-ring sealing surface data on the mechanical seal to the outstanding role of mechanical seal assisted O ring what materi
        [Industry News]O type of compression ratio of compression ratio is now the amount of tension[ 09/26, 2016 ]
        The O ring is a typical seal type kneading. The compression ratio and the drawing amount of the diameter of the O type circle section are the main contents of the seal program, which is of great significance to the sealing function and the
      Home About Us Products Product Type Material Equipment News Contact Us Stock
      三级黄影片大全性爱视频 - 视频 - 在线观看 - 影视资讯 - 品尚网